Rifled pandemonium 260mm precision aeg inner barrel 6.02mm grizzly lab (gz-pan-ri-02-260)

BRAND GRIZZLY LAB

Pandemonium precision barrel.
Inner rifled.
Diameter 6.02mm.
Length 260mm.
For AEG electric rifles.

The inner Pandemonium is sold in a kit which includes:
- Silicone rubber with r-hop integrated to the rubber already mounted on the inner
- Flat presser
- Aluminum fringed ring

The rubber pad can be used only and exclusively on Pandemonium inner for ASG Grizzly Lab Softair.

The inner Pandemonium must be used with pellets of heavy weight 0.32-0.36-etc ... bio and not bio.

Must be used single shot, can withstand short bursts with moderate rof.

Before mounting the Pandemonium inner, use silicone oil or grease to put on the outside of the rubber (not on the pellet entry lip) to facilitate its insertion on the t-hop-up.

Place the flat presser on the arm of the t-hop-up after having removed it, holding it in position with a small amount of silicone grease, taking care to insert it with the vertical part towards the muzzle of the inner.

Put the arm of the t-hop-up back in place after inserting the inner into the t-hop-up.

Check by loading the t-hop-up the perfect centering of the integrated patch of the rubber pad with respect to the inner window.

To calibrate the Pandemonium kit, shoot a few pellets in a single shot until the pellet begins to raise the shot, after which you begin calibration using the t-hop-up wheel, making sure to make a micrometric adjustment.
 
At the end of the game it is advisable to release the pressure on the rubber and repeat the operation at the beginning of a new game.
 
In some t-hop-ups a small adjustment of the arm dimensions may be necessary.