Firing regulator ascu pro version III generation 5 airsoft systems (as-031908)

BRAND AIRSOFT SYSTEMS

- ASCU PRO FIRE REGULATOR
- FOR GEARBOX VERSION III
-GENERATION 5
- MODIFIED AND UPDATED VERSION

Improve trigger response and shift efficiency with the Airsoft Intelligent Control Unit (ASCU), an easy-to-fit upgrade for nearly all common "Version 3" type shifters.

ASCU PRO provides a mechanical electronic fire control system along with a pre-cocking mode and an active braking unit. The pre-cocking unit (which can be deactivated) allows the piston to be preloaded in the "ready to fire" position after the initial firing cycle, which allows for faster release on subsequent rounds; this feature is paired with the ASCU PRO's active brake which stops the engine only when absolutely necessary to give you the ultimate in fire control. In addition, a total short circuit protection system protects the electronic components and the battery from damage caused by accidental short circuits.

Best of all, ASCU PRO lets you tailor the trigger response to your gaming needs with four easily programmable fire modes.

You can choose between these four modes:

1. Semi / auto combined / fully automatic
2. Semi / Full Auto
3. Semi / three shots sequence
4. Seeds / Seeds

To change the setting simply connect a battery to the ASCU PRO, wait for the vibrating signal to reach the desired fire mode and then simply hold the trigger to set and save the mode for immediate and future use. ASCU PRO can be set up and configured using only the fire selector and trigger and does not require connection to a PC or mobile phone app.

Built to take everything the player can throw at it, ASCU PRO is capable of withstanding massive power loads up to 240A, meaning the latest generation of high-powered LiPo batteries are problem-free.

Features:
- Single board design
- Mosfet
- Mechanical microswitches
- cycle monitoring
- Automatic active brake
- Automatic pre-arming (can be deactivated)
- Adjustable fire modes
- Fast hit sequences
- Mechanical safety
- Battery monitoring and battery shutdown
- Compatible with LiPo, LiFe, LiIon and NiMH batteries
- up to 15 V possible (11.1 V recommended)
- Can be charged up to 240A for a short time
- 16 AWG cable with T-Plug connector
- Short circuit protection
- Compatible with almost all V3 gearboxes
- Made in the EU