Zero Friction for VSR10 e.s. custom works (escw-55)

BRAND E.S. CUSTOM WORKS

ABSOLUTE NEW FOR THE YEAR 2020, KIT ZERO FRICTION BY ESCWORKS FOR VSR10.

After two years of studies, many prototypes and multiple tests, we have finally reached the FINAL version.

The zero friction for VSR10 is characterized by a body in Delrin, a plastic material with excellent mechanical properties, strong and light and with a very low surface roughness, only RA of 1.2.

The spiral milling, performed on the entire surface, gives the kit created a breathtaking appearance while at the same time reducing the contact surface between piston and cylinder; this design choice also favors the retention of the lubrication grease ensuring a constant very low friction between the parts.

    The zero friction kit is not limited to the body, the kit consists of many perfectly assembled elements:
    ° Coupling tail at 45 degrees in Ergal Aluminum alloy 7075 aeronautical.
    ° 90-degree hooking tail in burnished steel, self-lubricating and super resistant;
    ° Countersunk cylinder head with V-form oring, cylinder sealing oring and hopup rubber sealing oring.
    ° Airbrake Removable flared and closing grain if you want to remove the airbrake.
    ° ERGAL 7075 aeronautical alloy spring guide with removable steel bearings.
    All in one and only KIT.

The kit consists of BOTH HOOKING QUEUES, one tail will be installed and one will be loose in the package.

For special needs write in the notes the queue you want to receive already installed.

Each single kit will be supplied with 2 sealing ORs, with relative label MB03 well and TM and clones.

Each single kit will be supplied with grain and airbrake. at the time of installation, it is recommended to use thread locker.

Zero friction kit tested with the main cylinders on the market: Original TM cylinder - Original MB03 well cylinder - Actionarmy cylinder for VSR10 - Laylax cylinder for VSR10.